Tekmar Actuating Motor, Floating Action, 10 N-m, 88 in-lb of Torque
SKU: 743
Questions About Tekmar 743?
Innovations by VP has professionals available to assist you with your selection from Tekmar
Email an Expert
More Like This
Product Details
Tekmar 743
The actuating motor 743 is a 24 V floating action actuator designed to operate all tekmar brass mixing valves (710 to 724). It receives a 24 V open or close signal, which causes the motor to open or close the valve. It provides 10 N-m (88 in-lb) of torque over a 90 degree rotation. This product rotates its output shaft whenever 24 VAC is applied between either the counter clockwise or clockwise terminals and the Com terminal. It is compatible with any control having a 24 VAC floating output.
- UPC 779655074307
- Online Product ID 10280901
- Width 3.13"
- Height 3.63"
- Depth 3.56"
- Warranty 3 years Limited
- Ambient Temperature Range 32 to 122 degree F
- Control Signal 24 VAC, Floating Action
- Enclosure Material Polycarbonate
- Indoor Outdoor Indoor
- Nema Rating NEMA 1
- Power Rating 1.5 VA
- Power Supply 24 VAC plus /-10 percent , 60 Hz
- Rated Torque 10 N-m
- Relative Humidity <95 percent Non-Condensing
- Rotation Angle 90 degree
- Run Time 117 s
- Suitable For Use With Tekmar Brass Mixing Valves 710 to 724
- Shipping 1.1 lbs.
Additional information
- 117 s open or close time at 60 Hz
- Electrically limited to 90 degree shaft rotation
- 10 N-m (88 in-lb) of torque
- It is compatible with any control having a 24 VAC floating output
- Designed to operate all tekmar brass mixing valves
Resources
Online Tools
Downloads
About This Brand
Tekmar
Innovations by VP is proud to present this decorative Accessories, by Tekmar. The 743 is made from premium materials, this Accessories offers great function and value for your home. This fixture is part of Tekmar's Collection, so make sure to check out other fixtures to accessorize your room.
With over 28 years of experience tekmar Control Systems understands the comfort of the occupants in a building depends on the performance of its heating, ventilation & air conditioning (HVAC) system. Since 1984, tekmar has developed affordable heating & cooling control solutions designed to get the best performance from the mechanical equipment and system. In anticipation of the needs of tomorrow, they continue to innovate and pioneer new technologies, following their motto "Better Design. Better Control. Better Systems."